& Digital output programmers
Page 1 2
3 4 5
programming is configured and executed very easy, through the Servo Motor
Programmer and the Digital output (Relay) programmer.
The desired servo motor position for the desired time is entered in the
For example:at 10 msec the desired position is 90, at 510 msec the position
is 93, etc.
The motion is tested -the user sees the curbe for every servo motor on
Type how many times we want to repeat the motion, and run it!
Relay output programmer works the same way (the position range is 0 to
based programming can be used for :
camers, to cover large areas
robotics, to test and run the robotic arm motion